06/08/21, 09:02 PM | #1 |
Dungeons Champions for Blackwood
I tried to add to the DungeonsChampionsdata.lua all the information i could gather for having the champions into the delves and or public groups.
I did it. I can see the boss in all delves and publics groups (except the Deadlands) Code:
DungeonChampionsData["blackwood"] = { -- Blackwood u30_undertowcavern = { {.501,.152,2971,1}, -- --Druvaakh the Smasher }, u30_xanmeeroverlook = { {.516,.457,2971,2}, -- --Raj-Kall Ioraxeek }, vaultdelve_int03 = { {.36,.653,2971,3}, -- --Karzikon the Razorsworn }, arpeniah_base = { {.166,.381,2971,4}, -- --Shadow Knight Nassuphae }, u30_bloodruncave = { {.289,.648,2971,5}, -- --Tumma-Maxath }, vunalk2 = { {.293,.427,2971,6}, -- --DChoking Vine }, zhmain_base = { --Zenithar's Abbey {.354,.47,2997,1},--Grapnur the Crusher and Burthar Meatwise {.205,.719,2997,2},--The Frigid Temptress {.366,.174,2997,3},--Gloom-Tooth {.546,.487,2997,4},--Arbitrator Tasellis {.88,.535,2997,5},--Fulciinius the Bone Miser }, u30_silenthalls ={--The Silent Halls {.229,.593,2996,3},--The Rootwhisperer {.556,.178,2996,4},--Vor'chul the Beastbreaker {.455,.756,2996,5},--Dread Irenan {.604,.348,2996,1},--Kao'kuul {.328,.709,2996,2},--The Silent Sentry }, } The numerous boss are showing up on the global map though there is some different maps to access to them. Is this normal ? I know i miss a boss too (Ra'back the Trap Master) but i do not find the map for it. It should be the ZHGroupEvent_base, i just need to go back into the instance and to get again the coords. THank you So i will check that later |
|
06/09/21, 09:13 AM | #2 |
Not sure how to handle dead lands to be honest because I'm not sure how easy it is to bring up the maps depending on which one you are on. If you press M obviously you get your current map. However, once you right click that might take you to Tamriel and not the map you want.
I have only been to one of them so I am unsure what to do for now. Last edited by Sharlikran : 06/09/21 at 11:43 AM. |
|
06/09/21, 10:00 AM | #3 | |
Join Date: Mar 2017
Posts: 8
|
How were you able to get the coordinates for each boss?
|
|
06/09/21, 11:50 AM | #4 |
The developers do not provide the means to do that. This is just arbitrary placement, a "just because" kind of situation. Most mods have a /mypos /myloc /fishloc or some such thing that get the players location. I use my own utility that tells me the XY, LibGPS XY (because it's different and has scale included), and the 3D location should I want it. That's all just preference.
Just to answer it is "GetMapPlayerPosition("player")" but you have to output that somehow etc. There is a lot to that also. For example, when you are outside a delve consider that above ground. When you are in the delve usually you are below the ground in the same approximate location. So while the XY might work for the actual map under ground, if you use the same coordinates for the main zone map you would be off in some odd location compared to the entrance to the delve. |
|
06/09/21, 04:21 PM | #5 | ||
Join Date: Mar 2017
Posts: 8
|
I will say though that their x/y/z positioning was spot on if I compared their location to where they would line up on the appropriate submap. |
||
06/09/21, 06:58 PM | #6 | ||
Code:
skyshardsData["blackwood"]["arpeniah_base"]=skyshardsData["blackwood"]["arpenial_base"] skyshardsData["blackwood"]["arpeniah2_base"]=skyshardsData["blackwood"]["arpenial_base"] skyshardsData["blackwood"]["arpenial3_base"]=skyshardsData["blackwood"]["arpenial_base"] |
|||
ESOUI » AddOns » AddOn Help/Support » Dungeons Champions for Blackwood |
«
Previous Thread
|
Next Thread
»
|
Display Modes |
Linear Mode |
Switch to Hybrid Mode |
Switch to Threaded Mode |
|
|